Carbon Steel Pipe
Spiral steel pipe for a wide range of uses
SPECIFICATIONS
What is spiral steel pipe?
Spiral steel pipe is a spiral seam steel pipe, which is made of strip coil plate as raw material, often formed by warm extrusion, and welded by automatic double-wire and double-side submerged arc welding process. Adopting advanced double-sided submerged arc welding technology, the welding can be achieved in the best position, not easy to appear the wrong edge, welding deviation and penetration defects, easy to control the welding quality. Spiral steel pipe is commonly used in dust collection as well as other applications such as industrial ventilation, spray booth stacking, welding booths, paper trim, pharmaceutical clean rooms, etc. Spiral Pipe is easily shipped.
What is the production process of spiral steel pipe?
Spiral steel pipe is a spiral seam steel pipe, which is made of strip coil plate as raw material, often formed by warm extrusion, and welded by automatic double-wire and double-side submerged arc welding process.
1.The raw material is strip coil, welding wire, flux. They must undergo rigorous physical and chemical tests before they are put into use.
2.Single wire or double wire submerged arc welding is used for butt joint of strip steel head and tail, and automatic submerged arc welding is used for repair welding after rolling into steel pipe.
3.Before forming, strip after leveling, cutting edge, planing edge, surface cleaning transport and bending treatment.
4.The electric contact pressure gauge is used to control the pressure of the cylinder on both sides of the conveyor to ensure the smooth transmission of the strip.
5.External control or internal control roller forming.
6.The weld gap control device is used to ensure that the weld gap meets the welding requirements, and the pipe diameter, the amount of wrong edge and the weld gap are strictly controlled.
7.Both internal and external welding are performed by single wire or double wire submerged arc welding of American Lincoln welding machine, so as to obtain stable welding quality.
8.All welded welds have been checked by on-line continuous ultrasonic automatic damage instrument, which ensures 100% nondestructive testing coverage of spiral welds. If there is a defect, automatic alarm and spraying mark, production workers can adjust the process parameters at any time according to this, and eliminate the defect in time.
2.Single wire or double wire submerged arc welding is used for butt joint of strip steel head and tail, and automatic submerged arc welding is used for repair welding after rolling into steel pipe.
3.Before forming, strip after leveling, cutting edge, planing edge, surface cleaning transport and bending treatment.
4.The electric contact pressure gauge is used to control the pressure of the cylinder on both sides of the conveyor to ensure the smooth transmission of the strip.
5.External control or internal control roller forming.
6.The weld gap control device is used to ensure that the weld gap meets the welding requirements, and the pipe diameter, the amount of wrong edge and the weld gap are strictly controlled.
7.Both internal and external welding are performed by single wire or double wire submerged arc welding of American Lincoln welding machine, so as to obtain stable welding quality.
8.All welded welds have been checked by on-line continuous ultrasonic automatic damage instrument, which ensures 100% nondestructive testing coverage of spiral welds. If there is a defect, automatic alarm and spraying mark, production workers can adjust the process parameters at any time according to this, and eliminate the defect in time.
9.The air plasma cutting machine is used to cut the steel pipe into single roots.
10.After cutting into a single steel pipe, each batch of steel pipe shall be subjected to a strict first inspection system to check the mechanical properties of the weld, chemical composition, melting status, surface quality of the steel pipe and through nondestructive testing to ensure that the pipe making process is qualified before it is formally put into production.
11.The part with continuous acoustic flaw detection mark on the weld shall be reexamined by manual ultrasonic and X-ray. If there is any defect, it shall be reinspected by non-destructive test after repair until it is confirmed that the defect has been eliminated.
12.The butt weld of strip steel and the tube where the D-joint intersects with the spiral weld are located shall be inspected by X-ray television or film.
13.Each steel pipe is subjected to hydrostatic test, and the pressure is radial sealed. The test pressure and time are strictly controlled by the microcomputer testing device for steel pipe water pressure. Test parameters are automatically printed and recorded.
14.Pipe end machining, so that the end perpendicularity, groove Angle and blunt edge can be accurately controlled.
Why choose us to buy spiral steel pipe ?
As a leading line pipe distributor, Metleader has been exporting line pipes with big quantity to many countries and areas. Our company have been passed several certificates including ISO9001: 2008, ISO14001, OHSAS18001, CE certificate, one member of supplier system of Sinopec, and CNPC.In situations like high pressure, temperature, and corrosion, our spiral steel pipes are perfectly suitable. We not only have moderate price but also delivery in time. If the customer has special request for the pipe line, We will provide the best service to our customers. welcome your inquiry timely sales@metleader.com .
Our Advantages:
1.Quick Respond2.Reasonable Price
3.Abundant stock and prompt delivery
4.Flexible payment terms
5.Rich experiences in manufacturing and exporting
6.Excellent Quality