Industrial insulation pipe fitting production
Thermal insulation pipe fittings mainly include thermal insulation elbows, thermal insulation elbows, thermal insulation tees and crosses, thermal insulation reducers, etc. Among them, the thermal insulation elbow is mainly used for the manufacture of high-strength thermal insulation materials. Through comprehensive optimization of the design and construction of thermal insulation elbows, three-way and four-way, and thermal insulation reducer, the effective control and optimized configuration of high-strength thermal insulation materials are realized; Three links and four links refer to the use of better equipment and technology to achieve effective control of high-strength protective materials without increasing costs. The plastic heat preservation materials of heat preservation pipe fittings mainly include polyethylene, polypropylene, butyl rubber, polyester and so on. Polyethylene is a special fiber with excellent heat resistance. It not only has good waterproof function under hot pressing, but also can exert its good anti-corrosion effect during heat sealing and sealing. Polyethylene resin is a special resin.According to reports, in the manufacturing process of thermal insulation pipe fittings, the materials used are mainly refractory materials, corrosion-resistant materials and preservatives. Currently, refractory materials and products with good water resistance are used in the market, such as aluminum alloy insulation pipes, aluminum alloy heaters, and high-strength steel pipes. However, there are not many domestically produced products. It is understood that many warm models on the market currently use this technology. In the polyurethane foam material, the surface smoothness of the polyurethane foam is relatively high. It can make the polyurethane foam material rupture only when the temperature reaches above ℃. Because this kind of insulation pipe has high heat resistance, it will generally be dangerous during use. Therefore, the thermal insulation performance of its polyurethane foam is 5 times that of ordinary foam.
In the production of industrial insulation pipe fittings in Cangzhou, insulation pipe fittings cannot be used in various fields because they are made of polyurethane materials. It is reported that there are dozens of new types of insulation pipe fittings in the world, two of which have been widely used in the United States and Japan. The pipe material of the insulation pipe has good water resistance and moisture resistance. The polyurethane foam of the insulation pipe is characterized by its good impact resistance, good corrosion resistance, abrasion resistance and high acid and alkali resistance. Since the thermal insulation pipe fitting is a kind of thermal insulation material with simple structure, it needs to be modified in the engineering construction. In order to meet the needs of engineering construction and construction requirements, the thermal insulation pipe fittings have been improved. For example, high-strength and high-density steel pipes have been proposed at home and abroad. The characteristics of the thermal insulation pipe fittings are the long and large diameter of the elbow, and good impact resistance.
The material of the insulation pipe fittings has the characteristics of high strength and good corrosion resistance. Polyurethane foam is used in the insulation pipe fittings, which has high heat resistance and moisture resistance. It can be used not only in family residences, but also in buildings such as offices and commercial buildings. Polyurethane foam insulation material is a new type of building material, which has high corrosion resistance and heat resistance, and can be used for exterior walls and roofs of buildings. In the choice of insulation pipe fittings, polyurethane foam insulation pipe is a better choice. Polyurethane foam insulation pipe has the characteristics of simple structure, convenient use, non-toxic and odorless, and is a high-tech product. It can not only effectively reduce the environmental pollution caused by moisture and dust, but also greatly reduce the harm to human health caused by various harmful substances in the indoor air. Therefore, the development space of polyurethane foam insulation pipes in domestic and foreign markets is very broad.
During use, the thermal stability of polyurethane foam insulation pipe fittings is also greatly improved. Polyurethane foam insulation pipe fittings have good high temperature resistance, due to its good impact resistance, wear resistance, corrosion resistance and other advantages. And it can be used in a short time. Therefore, thermal insulation pipe fittings have good water saving. Due to the special properties of polyurethane foam, the insulation pipe fittings have the advantages of corrosion resistance, impact resistance and antistatic, so it has become a new type of insulation material. It is understood that my country currently uses more than 200,000 tons of polyurethane foam pipe fittings. Among the existing thermal insulation material companies in my country, only a few have an annual output exceeding tons. From this point of view, the development prospects of polyurethane foam insulation materials are very broad.
Pipeline insulation fittings are customized. In order to adapt the insulation fittings to different environmental conditions, appropriate thermal stability, durability and corrosion resistance should be selected. The manufacturing cost of insulation pipe fittings is relatively low, so it should adopt better thermal stability, corrosion resistance and aging resistance in the production process. In the selection of thermal insulation pipe fittings, it can be selected according to the climatic conditions, soil and building quality in different regions. Thermal insulation pipe fittings mainly include thermal insulation elbows, which are equipped with a fixed proportion of thermal insulation tees and crosses on the thermal insulation elbows, so that they can withstand greater pressure. The principle of the thermal insulation three-way four-way is changed to the interaction between the external pressure and the internal pressure to form a balanced state; the external resistance is different due to the three-way resistance, so two resistors are added to the external thermal insulation elbow to form a balanced state .
Previous：Long Weld Neck Flanges raw material specifications
Next：Three different manufacturing methods of steel pipe
Next：Three different manufacturing methods of steel pipe
