Beijing Metleader pipeline technology inc manufactures and supplies high quality 6 inch to 4 inch pipe ecc reducer. Compared with the concentric reducer(abb is con reducer), the eccentric reducer (abb is ecc reducer), don’t has a common center line. So in a lot of construction, eccentic reducer always be used to avoid some problems which the con reducer couldn’t solve.
For example, in the liquid phase pipeline, if we use the con reducer with the bottom flat, there would be some impurities accumulate in the bottom of the pipeline, to influence the fluency of the pipeline. In this case, the pipe ecc reducer is the best choice.
6 inch to 4 inch pipe ecc reducer are the most popular size. So we have lots of reducer products of these sizes in stock, which according to the standards of ASME B16.9, made of A105 carbon steel. Selection and installation of 6 inch to 4 inch pipe ecc reducer
When the eccentric size of the head in the installation, if found in the pipeline changes in the fluid, whether it is larger or smaller, if the speed of change is small, should use eccentric size head.
Eccentric size of the head in the installation should be unavoidable in the location of the change in the gas accumulation, so as to avoid the phenomenon of cavitation. When the pipe from top to bottom of the pump, should be in the top of the position of the eccentric size head installation.
Material: carbon steel A105 A106 A234 WPB
Stainless steel 304 304L 316 316L The main products of 6 inch to 4 inch pipe ecc reducer
6 inch * 5 inch pipe ecc reducer
6 inch * 4 inch pipe ecc reducer
6 inch * 3 inch pipe ecc reducer
5 inch * 4 inch pipe ecc reducer
5 inch * 3 inch pipe ecc reducer
4 inch * 3 inch pipe ecc reducer
4 inch * 2 1/2inch pipe ecc reducer Other Pipe fittings products