Carbon Steel Pipe
China low carbon steel pipe factory
SPECIFICATIONS
What is low carbon steel?
Low-carbon steels contain up to 0.30% carbon. A majority of this class of steel is flat-rolled products like sheet or strip; usually they are in a cold-rolled and annealed condition. These steels have high formability as they contain very low carbon, usually less than 0.10% C, with up to 0.4% Mn.
For rolled steel structural plates and sections, the carbon content is often increased to approximately 0.30% and manganese content increased to 1.5%. These materials are useful for stampings, forgings, seamless tubes, and boilerplates.
For rolled steel structural plates and sections, the carbon content is often increased to approximately 0.30% and manganese content increased to 1.5%. These materials are useful for stampings, forgings, seamless tubes, and boilerplates.
Low Carbon Steel Contents and Use
Low carbon steel is composed of 0.04 – 0.30 percent carbon. Welders and piping experts prefer low carbon steel for things like boiler plates, wire products and seamless tubing and piping uses. Auto manufacturers typically prefer low carbon steel for vehicle body panels. If the low temperature carbon steel piping is seamless, it can be installed when processing or manufacture piping requires low temperatures to avoid negative impact on this type of piping. One example of use of low temperature carbon steel pipe would be in processes where refrigerants are required to be 50° F. If this is the case, choose ASTM A333 Grade 6 Low Temp Seamless Carbon Steel for pipes transporting refrigerated process materials through a system.
This is a simple guide to new installations of low carbon steel pipes with chemical components that include:
. Carbon (max) 0.30
. Manganese at 0.29-1.06
. Phosphorus (max) 0.025
. Sulfur (max) 0.025
This applies to pipe size ranges of one-half to 24 inches and STD, XH, 40, 80, 100, 120, 160, XXH standard schedules. Other specifications for these size ranges include tensile Strength (min) Psi of 60,000 with MPa of 415 and yield strength (min) Psi of 35,000 and MPa of 240. SO China steel pipe factory Beijing Metleader Pipeline Technology Inc. Can provide the low carbon steel tube. Welcom you contact us with email.
This is a simple guide to new installations of low carbon steel pipes with chemical components that include:
. Carbon (max) 0.30
. Manganese at 0.29-1.06
. Phosphorus (max) 0.025
. Sulfur (max) 0.025
This applies to pipe size ranges of one-half to 24 inches and STD, XH, 40, 80, 100, 120, 160, XXH standard schedules. Other specifications for these size ranges include tensile Strength (min) Psi of 60,000 with MPa of 415 and yield strength (min) Psi of 35,000 and MPa of 240. SO China steel pipe factory Beijing Metleader Pipeline Technology Inc. Can provide the low carbon steel tube. Welcom you contact us with email.